days agoFarmington, MI+9 milesFree Stuff
I have about 50 landscape blocks; 10.5 x 7 x 4, free for the taking. Piled up neatly along 29481 Crawford Ct. in Farmington Hills. Help yourself.
BRAND NEW SET OF JESEL TIE BAR LIFTERS FOR A FORD 429-460, WILL FIT SUPER FORD 429-460SUPER COBRA JET OR A460 HEADS, THEY ARE .937 DIAMETER WITH A .850 WHEEL, THEY HAVE AN OFFSET INTAKE CUP, PART # KTL-S937850-16 THESE RETAIL FOR 1725.00 FOR SUMMIT OR JEGS, DON'T MISS THIS DEAL, CALL OR TEXT DAVE 734-778-1399. Garden City, MI 48135 (734) 778-1399
Ready to run 4 Bolt Main short block with ARP main studs, factory STD/STD steel crank (internal balanced), Comp roller cam, Roll Master billet race timing set with IWIS chain, BME Aluminum rods (0.250 long), SRP Dome pistons (12.5-14.0:1 depending on cylinder head cc), Total Seal rings with tool steel top and napier 2nd ring, ATI Neutral Balancer. Just add cylinder heads, intake, oil pan, and r...
over a month agoBelleville, MI+11 milesAuto Parts for Sale
December '61 long block engine. Upper end re-fresh and re-seal. Cylinders showed very little wear so were re-honed and new Grant rings installed on pistons. Heads cleaned up with valve seats cut and valves lapped in. Case very clean inside. Hot tested and ready to go! $450 plus shipping. Can also do a complete re-build if desired. video https://youtu.be/3c2JOx3nv5w _________________ DDC Racing ...
over a month agoBelleville, MI+11 milesAuto Parts for Sale
Just built mild performance 1915cc long block motor. Built on a dual relief case, 8mm studs. AM THING case, Standard size journals. New counterweighted crank, new forged flywheel. Re-built rods. 110 cam & lifters. New AA 94 mm pistons & cylinders. New heads with 40/35.5 valves. Re-conditioned rockers. Case has holes for bus mounting. $1995 with dualport exchange. Add $300 if no trade in. ______...
over a month agoRedford, MI+12 milesElectronics for Sale
Include installation disk, activation files, registration, and product key, located East (St. Jean & Jefferson) & West (I96 & Telegraph) of Detroit If interested message me for contact information to setup a meet time & location. Delivery & Shipping is available
Item must be returned within: 14 Days Refund will be given as: Money Back Returns Accepted: Returns Accepted Return policy details: Return shipping will be paid by: Buyer Restocking Fee: No Clearance Sale of used parts in our warehouse 2005 Yamaha FZ6 with 12,001 miles We are a registered licensed salvage dealer Lower frame block spacer and bolts - not damaged all good Left and Right hand means...
New without Original box. Manufacturer Part Number: SBC Brand: Unknown You are viewing a listing for a SBC Chevy Cast Finned Aluminum Timing Cover with Water Block Off Plates Fuel pump mounting flange drilled for 3 bolt pattern. New without Original box. IF YOU HAVE ANY QUESTIONS, PLEASE CALL OR TEXT ME ANYTIME at 248-917-6567 We are not a manufacturer, nor an expert concerning any listed items...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No Clearance Sale of used parts in our warehouse 2004 Suzuki SV 650 S 2004 parts (S58 in the title is a number we gave the bike) We are a registered Salvage dealer - we own the bikes and have all the paperwork....
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No 2009 Suzuki GSX650F with only 5871 miles Engine block with good bores - not damaged - in good shape - from good running motor Bike has 5871 miles Left and Right side are as you are sat on the bike Used parts...
Condition: Used Part Brand: Kymco Brand: Kawasaki Manufacturer Part Number: na 2009 Kymco Xciting 250 Scooter only 12671 miles Front brake line splitter block - tested working - from a good running bike - in good shape - works fine Left and Right side are as you are sat on the bike Used parts - may need some cleaning before use We ship all over the world every day The part(s) in the pictures ar...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No Clearance Sale of used parts in our warehouse Kawasaki ZX7R 2001 model parts - (we are told 1996 thru 2003 are all the same you should check to be 100% sure) Rear wheel axle blocks - in good shape Used parts...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No Part Brand: Kawasaki Clearance Sale of used parts in our warehouse Kawasaki Ninja EX250 250R 2011 model parts from tested running bike only 2686 miles on the odometer Engine cylinder block with good bores - ...
Condition: Used Brand: Hurst Country/Region of Manufacture: United States Manufacturer Part Number: CV-202 Interchange Part Number: ADJUSTATORQUE Other Part Number: CV-192 You are viewing a listing for a Vintage HURST SMALL BLOCK CHEVY ENGINE CONVERSION MOUNT RAT HOT ROD ENGINE SWAP SBC This is correct for installing a small block Chevy in any early car or truck. This well designed mount elimin...
nos, has some minor shelf wear and rust Manufacturer Part Number: D3TZ-6269-A Part Brand: Ford Warranty: No Ford OEM Engine Cam Thrust Plate D3TZ-6269-A, 65 -77 Big Block Year Model Fits 1967 - 1970 MUSTANG 390, 428 1965 - 1967 F100-F350 352 1968 - 1977 F100-F350 360, 390 Please study pictures and part number before purchasing. See my other listings for other New, Used, Remanufactured, & NOS pa...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No Part Brand: Ducati Clearance Sale of used parts in our warehouse 2008 Ducati 1098 with 9064 miles We are a registered Salvage dealer with only legitimate bikes - we own the bikes and have all the paperwork. ...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Returns Accepted: Returns Accepted Restocking Fee: No Part Brand: Ducati Clearance Sale of used parts in our warehouse 2008 Ducati 1098 with 9064 miles We are a registered Salvage dealer with only legitimate bikes - we own the bikes and have all the paperwork. ...
over a month agoWixom, MI+11 milesAuto Parts for Sale248-904-7134
Condition: Used Warranty: No Chevy big block valve cover's 396 402 427 454 . Will need restored SOLD AS PICTURED .NEED MORE PIC'S LET ME KNOW . ANY QUESTION'S CALL MARK 248-904-7134 .$22.00 SHIPPING TO LOWER 48 STATE'S .SHIPPED WORLDWIDE . CHECK MY OTHER AUCTION'S
Condition: Remanufactured Brand: chevy small block Manufacturer Part Number: sb2 Fresh rebuilt Ilmor/Phil Harper built Chevy SB2 brodix aluminum block,4.145" bore ,crower crank 42 lbs,3.220' stroke, jesel belt dr., carrillo rods 6.125" , new je pistons 13.8 comp ratio, GM SB2.2 heads with titanium valves , In. 2.180', ex. 1.600, jesel rocker arms, comp cams 50 mm cam, jesel tie bar lifters, new...