1947 Studebaker pick up , The original cab has been removed and replaced with a “CORROSION FREE" replacement cab (the orange cab in the photos) Factory installed STEEL FLOOR pick up box with a Solid body, no rust Has "Studebaker Logo" tail gate The engine is a 6 cylinder FLATHEAD and turns freely New interior seat and arm rest upholstery has been completed to match original colors and de...
1959, 59. GMC -- COE, LCF, SNUB NOSE, CAB OVER 100% Original 336 cu in, ORIGINAL V-8, 4 speed trans, 2 speed rear, 51 k miles 99% rust free NEW CUSTOM BUILT DUAL EXHSUST, fabricated and installed by local exhaust shop Starts, stops, runs and drives This truck is road worthy I have clear title in hand The truck is located in PEMBINA, ND Price for snubnose is $8000 Also available, 20 Ton...
1940, 40 International, IHC 1/2 ton pickup ..........RAT ROD. or. RESTORATION TITLE is in my name and it matches the VIN number Frame has a Camero “front clip” with Disc Brakes, Chevy rear axle, Anson aluminum slotted wheels Cab corners are SOLID, cab floor is NOT ROTTED, solid door - included is bottoms,running boards, fenders, headlights, hood, grill, PLUS ......a good RADIATOR, TAILGAT...
1947, 47 PLYMOUTH PICK UP “ SHORT BOX” TRAILER This is a “SHORT BOX”. BodY and It has STRAIGHT SIDE RAILS The box length is 6'-6" inside dimensions Has ORIGINAL 47 step side fenders but they need some body work There is No tailgate It was made into a trailer years ago (was $750) -- NOW $550 Delivery is available with other vehicles scheduled for delivery in your direction
LANDALL (LHL) hydraulically tilting flatbed with hydraulic winch- eight (8) new tires and wheels with 0 (zero) miles on them. Deck is 8’ wide x 30’ long DISC BRAKES @ all wheels Full DIAMOND PLATE DECK with movable "ring style" tie downs The trailer is located in Pembina ND Price for the trailer is $8000
1941 DIAMOND T DUMP TRUCK COMPLETE TRUCK for kreastoration or parts This truck is a ROLLER The Diamond T has an Anthony brand dump body and hoist I HAVE ALL STAINLESS HOOD AND GRILL TRIM and both windshield glass panes, plus the body panel which is located directly under the grill (Any parts which were not secure, have been removed for transport to assure they did not get lost or damaged)...
1940 International Parts (Note: the body parts are same as 1937,1938 and 1939 IHC which are all D-series models) You can buy the complete truck for $3500 OR Buy either package listed below: (PACKAGE A) ....Consists of the COMPLETE 1940 IHC , D-series Cab, front fenders, grill, hood, head lights, parking lights, running boards w/ mounting brackets,bumper, and a good Radiator the cab has: —...
I am searching for a 1947-1954 GMC PICKUP TRUCK 1/2 ton, short wheelbase Does NOT have to run and drive If the engine and transmission Has already been removed , is also NOT a problem I am not searching for a restored vehicle or a pick up that requires major rust repair Also, PLEASE NO MAJOR BODY DAMAGE It is important that the tires are “aired up” and the truck rolls freely If you have...
$8,000

COE for sale

1959, 59. GMC -- COE, LCF, SNUB NOSE, CAB OVER 100% Original 336 cu in, ORIGINAL V-8, 4 speed trans, 2 speed rear, 51 k miles 99% rust free NEW CUSTOM BUILT DUAL EXHSUST, fabricated and installed by local exhaust shop Starts, stops, runs and drives This truck is road worthy I have clear title in hand The truck is located in PEMBINA, ND Price for snubnose is $8000
1940, 40 International, IHC 1/2 ton pickup ..........RAT ROD. or. RESTORATION TITLE is in my name and it matches the VIN number Frame has a Camero “front clip” with Disc Brakes, Chevy rear axle, Anson aluminum slotted wheels Cab corners are SOLID, cab floor is NOT ROTTED, solid door bottoms,INCLUDED IS: running boards, fenders, headlights, hood, grill, RADIATOR, TAILGATE, parking li...
(LHL) Hydraulic tilt deck trailer LANDALL (LHL) hydraulically tilting flatbed with hydraulic winch- eight (8) new tires and wheels with 0 (zero) miles on them. Deck is 8’ wide x 30’ long DISC BRAKES @ all wheels Full DIAMOND PLATE DECK with movable "ring style" tie downs The trailer is located in Pembina ND Price for the trailer is $8000
1941 DIAMOND T DUMP TRUCK COMPLETE TRUCK for kreastoration or parts This truck is a ROLLER The Diamond T has an Anthony brand dump body and hoist I HAVE ALL STAINLESS HOOD AND GRILL TRIM and both windshield glass panes, plus the body panel which is located directly under the grill (Any parts which were not secure, have been removed for transport to assure they did not get lost or damaged)...
1947 Studebaker Pick Up, Complete truck, new upholstery, clear title in hand, Comes with extra cab, engine and transmission 2 wheels have been sandblasted and powder coated back to the original orange/ white color scheme
1959, 59. GMC -- COE, LCF, SNUB NOSE, CAB OVER 100% Original 336 cu in, ORIGINAL V-8, 4 speed trans, 2 speed rear, 51 k miles 99% rust free NEW CUSTOM BUILT DUAL EXHSUST, fabricated and installed by local exhaust shop Starts, stops, runs and drives This truck is road worthy I have clear title in hand The truck is located in PEMBINA, ND Price for snubnose is $8000 Also available is 1979...
Hydraulic tilt deck trailer LANDALL (LHL) hydraulically tilting flatbed with hydraulic winch- eight (8) new tires and wheels with 0 (zero) miles on them. Deck is 8’ wide x 30’ long DISC BRAKES @ all wheels Full DIAMOND PLATE DECK with movable "ring style" tie downs The trailer is located in Pembina ND Price for the trailer is $8000
(LHL) Hydraulic tilt deck trailer LANDALL (LHL) hydraulically tilting flatbed with hydraulic winch- eight (8) new tires and wheels with 0 (zero) miles on them. Deck is 8’ wide x 30’ long DISC BRAKES @ all wheels Full DIAMOND PLATE DECK with movable "ring style" tie downs The trailer is located in Pembina ND Price for the trailer is $8000
1940, 40 International, was mounted on a S-10 Chevy long box IHC 1/2 ton pickup package (remount on your S-10 chassis) IHC TITLE is in my name and it matches the VIN number ON THE CAB The 1940 IHC comes with: ......cab with instrument cluster ......running boards with mounting brackets ......Front fenders with inner fender panels ......hood with hinges and latches ......head lights with mo...
1959, 59. GMC -- COE, LCF, SNUB NOSE, CAB OVER 100% Original 336 cu in, ORIGINAL V-8, 4 speed trans, 2 speed rear, 50,940 ORIGINAL miles 99% rust free NEW CUSTOM BUILT DUAL EXHSUST, fabricated and installed by local exhaust shop Starts, stops, runs and drives This truck is road worthy I have clear title in hand The truck is located in PEMBINA, ND Price is $8000
Searching for DANA Chevrolet license plate frames that were on vehicles sold at Dana Chevrolet located in Southgate California from the period of 1967-71. If you know of anyone or a vendor that frequents the Pomona swap meet that I could get in contact with would be greatly appreciated. I have attached a picture of the license plate frame that I am searching for. Thank you