57 Chevy rear end. $350. 57 Driveshaft. $100. My dad parted out a 57 4-door around 1975 and kept this rear end for his 32 Ford. It has been in his garage since then. I ended up with his 32 and decided to keep the banjo under it. I took the rear apart and had it hot tanked and checked. Everything appears to be in good usable condition with the exception of the pumpkin. The pumpkin is out of his ...
Hurst Motor Mount #177 3272. This mount is used to install a Small block Chevy or 348/409 in whatever chassis you have. It mounts to the front of the block. I only have one of the spacers that install between the block and mount (if needed). No damage or modifications. I bought it to use in my 32, but decided to keep the flathead. $125 plus the ride. Call 419-234-2628. WANTED: NOS 59A block. Ch...
NOS Magspark 6 Volt Transformer/Coil. Never installed or used. I bought this to use on my 32, but decided to go with a stock coil instead. $85 plus the ride. Ph. 419-234-2628. WANTED: NOS 59A block. Check my other ads as I will be selling off extra parts from my 32 build.
39-41 Axle tubes $75 pair, 39-41 torque tube $50, '39 rear drums $100 pair. I parted out a '39 Ford rear end and these are the leftover parts. One of the drums is .016 over standard and the other is badly grooved. Both hubs are excellent where the bearing rides. Pick up only. Call 419-234-2628 WANTED: NOS 59A block. Check my other ads as I will be selling off extra parts from my 32 build.
Vintage Chrome Hooker headers for a small block Chevy. In pretty good overall condition. They were in my dad's garage when I cleaned it out. I'm not sure what they fit, but the numbers stamped on them (2109-c) indicate they are for a 67-72 Camaro or Nova. If anyone out there knows any different, let me know and I will change my ad. $225 OBO. Pick up only. Call 419-234-2628. WANTED: NOS 59A bloc...
Nice original 32 Ford K-member. Very nice part! Some surface rust, I don't see any serious pitting. There might be a couple extra holes but nothing serious. $675. Ph. 419-234-2628. WANTED: NOS 59A block. Check my other ads as I will be selling off extra parts from my 32 build.
Original 32 Ford frame for sale. Titled as a Black Convertible. The frame is in the red oxide primer that was on it when I bought it. I was told this is an early frame because it has no reinforcing plates over the rear axle. It has an early style front cross member. I also have a Model A cross member if the buyer wants that instead. It is in very good condition with only light pitting in just a...
I have two pair of front backing plates for sale (see pictures) the rusty fronts are SOLD, the black ones (no visible pitting) are $75pr. I have one pair of rears (black) pitted but solid. SOLD. The two green ones are both left rears. They have been blasted and painted with vari-prime. VERY light pitting. $50 each. Prefer pick-up, but I will consider shipping a pair or single. Call 419-234-2628...
32 Ford fiberglass front fenders. These have been in my dad's garage since the 70's. I thought about turning them into wall art, but I have enough projects. Price drop!!!! $50 !!!!. Pick up only. Call 419-234-2628 WANTED: NOS 59A block 3 3/16" bore. Check my other ads as I will be selling off extra parts from my 32 build
Original rear spring from a 32 Ford. No broken leaves. In pretty nice condition with the original center bolt and clamps. Appears to still have nice arch to it. $125. Pick up only. Call 419-234-2628 WANTED: NOS 59A block. Check my other ads as I will be selling off extra parts from my 32 build
Afco 3870 BG shocks New installed but never left garage. Scott. Sidney, OH 45365 (937) 538-8027
T&D 1.70 ratio All hardware included. Sidney, OH 45365 (937) 538-8027
New 604 Mopar New Indy Maxx Aluminium Block Raised Cam Option Pushrod Oiling Option New Predator Heads New tit valves New Indy Tunnel Ram New 1050 Dominators New Linkage New Fuel Regulator New Bullet Cam New Diamond Pistons (Hard anodized) New GRP Rods New Callies Billet 4.625 Crank New T&D Paired Rockers New Jesel Pushrod Oiling Lifters .937 New Trend Pushrods Jesel Belt Drive Front Mount Dist...
493 CI Mopar 440 block short filled Aluminium main caps Callies 4.15 crank Eagle rods Diamond pistons Milodon oiling system ATI balancer New Indy 440-1 345 heads New T&D paired rockers New Tends pushrods Indy 440-3 intake 1050 Dominator MSD dist. New Comp roller lifters (pushrod oiling) .720 Roller cam Motor is complete, install add oil go racing. The topend is still at machine shop (Kammer and...
Aftermarket Aries forged aluminum 428 ford pistons.Part no. on inside of piston is CV 428.These are a nice set of new pistons.these are 4.375 bore and use a 1.094 wrist pin.. Waynesfield, OH 45896 (419) 568-3281 (567) 825-8320
[email protected] rockers 1-6 @1-55 complete with bolts fits brodix 18 drgree. Bellefontaine, OH 43311 (937) 592-8353 (937) 935-3650
new 842 streight up tall. new isky ,842 streinut up tall. Bellefontaine, OH 43311 (937) 592-8353 (937) 035-3650
5-Jan-2019Lima, OH+16 milesAuto Parts for Sale
I have a complete exhaust removed from a crew cab, long bed, 4WD, 6.5 turbo diesel. Too good to not use. I have no use for it. Turbopipe cl and hangers included
5-Jan-2019Lima, OH+16 milesAuto Parts for Sale
Here is a used, working transmission pulled from a prior running 1997 K3500 truck. It was powered by a diesel engine and well maintained in a municipal fleet. Truck was a crew cab long bed. $300The transfer case is also available, it is a Borg Warner, manually floor shifted with fixed outputs both front and rear. The transfer case also has a PTO provision. $250Drive shafts are also available, b...