$2,000

Semi tires

These tires are Hankook DL12 285-75-24.5 they are used and have 40000 miles on them still have 80% tread on them
This equipment is Fyrepel coat and pants are large size and will fit average man , the boots are size 6 1/2 on the boot but would fit men around 8 1/2 . Come in and check them out the boots new were $130 and look new wae are selling the everthing for a $125Gunslinger Mercantile
Approx 200 ft. of inch and a quarter aluminum pipe in 20 ft lengths . $275. 220 V single phase Doerr 1 hp extra duty motor with adjustable stand and pulley wheel for running large shop tool.
2008 Cat 226B with enclosed cab. This unit has the hydraulic quick connect/disconnect bucket pins. Runs strong with a turbo diesel engine and a low 1589 hours. Hours will go up a little as I m still using this machine. Hydraulics work perfectly and the machine has no oil leaks. Tires are decent. Comes with a Cat smooth bucket and 2 extra used tires. Machine has a couple small issues but nothing...
This is the perfect item to have if you are wanting to display a sign or even display jewelry or whatever else the jewelry would require a different board possibly but there is a bottom cabinet to this. Very solid won't blow over. 71 by 30 by 10
$9,500

Gen truck

1991 GMC 1ton dully. 46,000 miles. 15,000 pound winch. Gen poles. Clean truck welding bed on the back. 4 tool boxes. I will throw welder in for $1,500 the welder is a Lincoln 225. The torch doesn t come with truck. Call 620-282-1227 for questions. $11,000 for the truck and welder combined. Truck $9,500 welder $1,500. Will sell separate
Miller single phase 200 amp CP welder for sale on wheeled cart. Has gas flow connector switch for hard wire gmaw, 2 guns, ground clamp, and many extra parts...nozzles, tips, 3 extra sets of drive wheels, and a couple of extra spools of aluminum wire. Great all around shop welding machine. Runs steel or stainless just change liner and gas(has extra liner.) 850. O.B.O.
2007 GMC 4X4 Duramax Diesel w/Allison Automatic Transmission 141,000 Miles 10' Long Welding/Roustabout Truck with Poles. Tires are about 90% New. Fresh Oil, and Filters. A/C Blows Extremely Cold. Truck will need a Winch for the Poles. Does have some small dents in the cab & a tear in the drivers seat. Truck is probably a 7 out of 10Truck is Located in Great Bend KansasContact # 620-617-6333
$50

Keg taps

One keg tap and one pony keg tap$50 obo
SPECIALIZING IN ROLL OFF CONTAINERSServing Barton, Edwards, Ellis, Ellsworth, Ness, Pawnee, Pratt, Reno, Rice, Rush, Russell and Stafford Counties10, 20, 30 and 40 yard Open Top ContainersCommercial Residential, Individual and EstatesIndustrialDemolition and Remodeling JobsRoofingMetal RecyclingCompactorsEnclosed Pods for On-Site StorageDaily, Weekly or Monthly PickupsReasonable Rates421 Washin...