In case anyone needs these, I found some brand new Mopar lift 2 front swaybar links while cleaning out the garage. I have no clue as to why or how I got these. (It s been that long) $30 bucks plus shipping takes them.
Fits all 996 cars. These are the Tarett 5 position adjustable front and 4 position adjustable rear swaybars in like new condition. Front bar is 26.8mm diameter and rear is 20.7mm diameter and these come with the bushings included. New cost $750 now selling for $500 The adjustable drop links with dust boots were $545 new, now selling for $350 Buyer pays any money transfer fees from Paypal/Zelle/...
Swaybar smart bar actuator. Came off JL around 20k miles. Works perfect, as it should. Selling because I bought it for my sport and changed it out to the EVO on demand pneumatic disconnect. $200
As the title says, I am looking for a few good used parts: Catless race headers Tarret (or similar) rear adjustable sway bar + adjustable drop links I have a set of used very good condition Fabspeed sport headers that I may sell or trade if I can find a set of race headers.
Brand new .. 100 us shipping.(heavy parts thats why the price is so cheap) Radiator core support part number Mm5KM-8 Swaybar mounts part number Mm5FSB-22 Over 350 worth of parts 100 plus actual shipping
First up is a GForce1320 Heavy Duty Dual Bushing Differential Mount, lightly used. Installed a couple of years ago, but not a lot of miles on it. A little dirty, but i'll clean it up before i pack it. Comes with the bolts for the mount-to-body and the mount-to-diff cover. You may have to take the large bolts for the poly bushes out to align everything correctly, or it might go in as it is. Your...
The boxed endlinks are brand new. I was cleaning out my garage and came across these. I bought them a few years ago for either my STi ('04), WRX ('02) or Forester ('06). The endlinks and mounts all in one, excellent upgrade, takes all the stress from sway bar off of your lateral links. The first pic is from the web of how they look installed. The second pic are the actual links for sale. i'll t...
I bought this bar maybe 10 years ago from Harmon Motive but never installed it. I am in the OC in Socal. I will deliver if reasonably close. $150 plus shipping.
over a month agoAuto Parts for SaleWantedReport Listing
Looking for some thing thicker than the stock rear wagon bar. Just in case anyone has one sitting around they would like to get rid of. Thanks Sent from my SM-G955U using Tapatalk
Located in Richmond, VA. Prefer pickup but may consider shipping. Koni Yellow Struts are currently assembled with the Whiteline Lowering Springs and Maximum Motorsport Caster Camber Plates. Would like to sell the Koni Yellow kit w/ springs/plates together for $700. Whiteline Swaybar Kit is brand new, never been opened. Looking for $400.
over a month agoAuto Parts for SaleOfferedReport Listing
First up is a GForce1320 Heavy Duty Dual Bushing Differential Mount, lightly used. Installed a couple of years ago, but not a lot of miles on it. A little dirty, but i'll clean it up before i pack it. Comes with the bolts for the mount-to-body and the mount-to-diff cover. You may have to take the large bolts for the poly bushes out to align everything correctly, or it might go in as it is. Your...
over a month agoFor SaleOfferedReport Listing
I have a 26mm Steeda Front Sway Bar Part# 555-1068 that was installed on my 2004 Mazda 6 for 45min. I purchased this bar to replace a 24mm Whiteline bar that did not fit. The bend in the bar is not in the right plane to avoid the exhaust on my mark 1 series 1 Mazda6 V6 (exhaust above sub-frame) but will fit the 2006-2009 Ford Fusion V6 & L4 and 4cylinder Mazda 6's. I will include a set of greas...
over a month agoAuto Parts for SaleOfferedReport Listing
2009-2011 Coupe headlights. All clear,chrome housing. One tab on the bottom broken for passenger side, doesn't affect fitment $80 shipped Short ram intake with new K&N filter . Came with car from previous owner, dont know much about it. Filter is about 3 months old. $60 shipped OEM header & cat. Came off a coupe with 165k miles. No cel. Needs new bolts $130 shipped OEM rear sway bar. No end lin...
over a month agoAuto Parts for SaleWantedReport Listing
Looking for a oem rear sway bar off of an SI sedan for my r18, looking to spend around $30 given you can buy one at the dealership for $60
NEOTECH sway bars for 2011-2016 KIA Sportage FWD or AWD. This sway bar set was purchased brand new and never installed before the car was sold. Front bar is 27mm and rear is 21mm. These bars are thicker and stronger than the OEM bars and will greatly reduce the body roll of the Sportage. Comes with poly bushings and mounting hardware. Also, brand new OEM aluminum pedal set (Auto) for same years...
ADJUSTABLE SWAY BAR END LINKS 2005-2016 FRONTIER, 2005-2012 PATHFINDER & 2005-2015 XTERRA With 6 Inch Suspension Lift And Sub Frame Drop Down SKU: SPSBRADJEL These are not heim version so they have fully sealed joints that will keep out the elements. $205.00 Description High Quality Polyurethane Boots Zinc Coated Hardware For Longevity Sold As A Pair
Fits 2016 + Grand Cherokee SRT-8 6.4L engine (also fits NON-SRT models) Now On Sale! : $179.99 FREE SHIPPING & FREE color upgrade when you call & order through our sales department!! 443-456-3368 / 443-456-3369 Why Upgrade? Factory swaybar links are a weak 3/8" in diameter in the rear, and 1/2" in diameter in the front. The weakest link of the Jeep Grand Cherokee's suspension is the sway bar li...
We have had many 14/15 owners ask and purchase this 20mm swaybar with great feedback thus far so we created a kit for it Subaru Rear Sway Bar Kit - 20mm - 20451VA000-20464VA000-x2 | Subaru Online Parts It has also become a popular mod for XV owners as well The rear sway bar is a direct swap and includes the necessary bushings as well Please let us know if you have any questions Thank you!
Your Listing Here