More Filters
Any question about this product or any other air suspension product, feel free to call 216 -789-1647, or the shop at 216-481-5219 anytime or contact us through eBay. Try to contact other sellers and see what you get. Over 12 years on eBay and a 100% feedback, that should tell you something. This auction is for a used OEM 1967-69 Pontiac Firebird Rear Suspension Bump Stops. In used but good driv...
These pair of rear hatch prop rods/struts came off of a 1992 Firebird. They work properly and even come with two bolts. Over all ready to install!!!! Please view our other items!!!! Keep checking in weekly for our new listing being posted daily!!!! Over sea bidders are always welcomed!!! We are located in Denver NC, down the road from RACE CITY USA!!!! We strive to satisfy our customers and ass...
Clevite Push Rods (8) 215-4234 that fit the following: These Push Rods Fit the following engines: GM Car: 151 CID 2.5L Fuel Injected Pontiac 4 Cyl. 1985-86 GM Truck: 151 CID 2.5L Fuel Injected Pontiac 4 Cyl. 1985-86 Jobber (Wholesale) Price On This Set Is $20.32 If you have any questions you can contact us Monday Friday 8 am 6 pm at 866- 582-0942 (866 numbers are free calls). Give us a call if ...
These pair of OEM GM hood prop rods/struts came off of a 2000 Camaro. They work properly and are ready to install!!!! Please view our other items!!!! Keep checking in weekly for our new listing being posted daily!!!! Over sea bidders are always welcomed!!! We are located in Denver NC, down the road from RACE CITY USA!!!! We strive to satisfy our customers and assist them in each step of the par...
These pair of rear hatch prop rods/struts came off of a 1992 Firebird with the regular spoiler(so i am not sure if these will hold up the wrap around spoilers on the GTA's!) They work properly and even come with two bolts. Over all ready to install!!!! Please view our other items!!!! Keep checking in weekly for our new listing being posted daily!!!! Over sea bidders are always welcomed!!! We ar...
These are a pair of trunk spring rods for a deck lid with a spoiler. The one rod is thicker then the other so it can pop open the truck with a spoiler. Over all ready to install!!! Please view our other items!!!! Keep checking in weekly for our new listing being posted daily!!!! Over sea bidders are always welcomed!!! We are located in Denver NC, down the road from RACE CITY USA!!!! We strive t...
This is a delete plate that bolts on the driver side of the firewall and delete the hole where the clutch pedal would go though! This is obviously for a automatic car and all the mounting points are good and ready to install!! CHECK OUT MY OTHER CAMARO AND FIREBIRD PARTS. OVERSEAS BIDDERS WELCOMED. If you have any questions about this item or any other item that you may be interested in please ...
THIS IS A SET OF TRUNK SPRING RODS FOR A DECK LID WITH A SPOILER FOR A 1970 - 1981 FIREBIRD/TRANS AM TURBO/CAMARO/Z28.IT IS IN GOOD CONDITION CONDITION. THEY HAVE SOME RUST BUT ARE NOT BROKEN AND WILL WORK. PLEASE LOOK AT ALL OF THE PICTURES BECAUSE WE CONSIDER THEM A VERY IMPORTANT PART OF THE DESCRIPTION. PART # 157. NOTE: DO TO THE GROWING NUMBER OF SCAMS AND THE INCREASING COST OF SHIPPING ...
Similar
1967 Pontiac Firebird (Stock#442) Pontiac jumped headlong into the burgeoning pony-car segment in 1967 with the Firebird and it was an instant hit, selling more than 82,500 in its inaugural year. Of them, 19,000 were convertibles, like this Regimental Red 1967 Pontiac Firebird. Purchased by the seller in 2004, it has served as a long-term project and is the recipient of a number of restoration ...
1967 Pontiac Firebird (Stock#442) Pontiac jumped headlong into the burgeoning pony-car segment in 1967 with the Firebird and it was an instant hit, selling more than 82,500 in its inaugural year. Of them, 19,000 were convertibles, like this Regimental Red 1967 Pontiac Firebird. Purchased by the seller in 2004, it has served as a long-term project and is the recipient of a number of restoration ...
1986 olds cutless white would be a great project for a hot rod enthusiast or that city boy that wants 2build a tricked out amp quot pimp amp quot car watever ya may wanna do tha body is good and rust free needs new paint and vinyl rag top and minor fiberglass or replace tha plastic parts around tha grill and headlamps and sum interior work but i just put a new transmission in it and tuned it up...
Facebook marketplace only allows 20 photos but there are more photos on my website at www.carbuffs.com. Clean Camaro! Excellent running and powerful 383 stroker engine with 4 speed transmission. Runs and drives excellent with many receipts for recent work included. Only 2000 miles on the build. Here is a note from the owner: "Dear potential Z/28 buyer: Like many enthusiasts I fell in love with ...
THIS IS A PROJECT CAR. 1994 Firebird Formula. I've owned it since 1999, clean title, no accidents. It needs a lot of work. Roller + nearly everything to make it a beast. Car has not run since September 2006. Will need a full repaint, gone through, and reassembled. Interior: Corbeau seats, Wolfe Racecraft 6-point cage, old nitrous kit with gauges for nitrous pressure, fuel, and narrow band A/F. ...
THE ORIGINAL HOT ROD TABLE SALE Dunn and Gone Racing call or text 217-377-2087 email [email protected] We take credit cards and paypal Message me for a video of all the parts New TBS hi helix 10.71 blower with New Enderle Birdcatcher and new polished BBC manifold with new idler was $6706.96 when purchased---now as a package $5750.00 BDS EFI Bugcatcher injector $400.00 Carbon FC injector from Cr...
Most everything is from my 1969 Firebird but may of course fit many other Pontiacs and GM vehicles such as Camaro/Nova, etc. All prices are just estimated market values I found online. If there is no price estimate it's because I have no clue what it's worth. Many aftermarket items are brand new, so please note if the part has new or used in the description. Let me know what you want, I'll text...
Solid steel Henry Ford body, straight, not chopped, not patch panels, has modified floor and firewall, filled roof and cowl. Very nice tin, a lot is done or mostly done, enough left to do you can feel it s yours. Current Iowa plates. Chassis built to be low, has Mustang II front IFS, power rack, 4-bar rear, rebuilt 9 posi, Currie axles, QA-1 coil-overs, C-notched rails, Rocket Igniters, new tir...
1970 Pontiac Firebird Trans Am. Great running and very fast 1970 Firebird Trans Am Clone. Have spent a lot of time on this car and it runs like a champ. The entire drivetrain has been redone, it has been very reliable to me, and the sound of it turns heads everywhere I go. The engine and rear end gear combo allows for very quick take offs. Great hot rod if your looking for a real street machine...
It's time to do the inevitable. I've enjoyed this truck immensely, but I'm not getting any younger, and I hardly drive it anymore. So I'm hoping to find it a good home, and Stovebolters will get the first crack. This truck has so many features, it's hard to list them all. I'm asking $25,000 for the truck. It won 2nd in class at the Kansas City show a few years back (got beat by a Stovebolter wi...
Your Listing Here
1 + ... Next >