More Filters
2015-2021 Mustang Carbon Fiber Mirror Cap Set (used), purchased from Shelby American (made by Borla - see pics). Replaces the OEM mirror caps without turn signals - $250 + shipping. These are supposed to be epoxied in place of (NOT over) the OEM mirror cap. There is a tiny bit of residual epoxy on the lip, it is not on a visible part of the cap when attached. They may need to be buffed once ins...
Here we have an original Intake Heat Shield for a Ford Factory 428 Police Interceptor Intake. This direct bolt on underside piece was used on the 390, 427, and 428 Big Block C6and C7AE intakes as well the Sidewinder 4 barrel aluminum intakes to reflect some of the heat given off by these high performance motors keeping the intakes cooler and providing your engine with a cooler, richer air.This ...
Here we have a rare set of 64 65 Mustang spindles for a 289 V8. Unlike many spindles that are stamped C3DE these actually are stamped for the Mustang (C4ZA). A rare item as we have never seen a set of these as nice as these. This original set was designed for and removed from a 64 1/2 Mustang, unlike the aftermarket and 'force fit' sets offered often on eBay. The spindles are original Ford qual...
Here we have an original Ford factory 4 speed radiator for a 68 Shelby GT 350 / California Special or Mustang or even Cougar equipped with a 302 2 or 4 barrel motor. This thick radiator is stamped with C8ZE-E1, and a 8CD date code (4th week of March 1968). Our inspection shows it listed as correct for a Standard shift or 4 speed car with no outlets for an automatic transmission cooler lines and...
Here we have a factory original Kelsey-Hayes used Proportioning Valve for a 1965-66 Shelby GT 350, Mustang GT or 66- 67 Thunderbird. A critical part of the Disc Brake package, the Disc proportioning valve balances the hydraulic pressure between the front and rear brakes to equalize the correct ratio of braking for optimum stopping power the controller for braking balance. This item has been dis...
Here we have an original almost-non existent one year only Sport Mirror set correct for a 1969 Mustang, Mach 1, Cobra Jet or Super Cobra Jet. The Passenger Mirror was the same for both 69 and 70 but the Driver Mirror was one year only for either 69 or 70. This style of adjustable mirror set was a costly add on option that was offered as an upgrade replacing the non remote mirror. Because of the...
Here we have a pair of Good used Original Ford issued 69 or 70 Boss 302 / 351 Cleveland Shelby Valve Covers. The original Shelby Cobra design on these covers is a wrinkle finish black look but underneath is a shiny finish waiting to be brought back if that s your desire. These are a rare find since the Shelby program was being fased out as the Boss 302 and the 351 Cobra Jet Cleveland were being...
Here we have a rare item, a heater box delete assembly for a 64-66 Mustang, Shelby, or Falcon. This original used setup includes the box with door and heater control dash blank-out plate. This item was used to reduce the weight of these early high-performance cars by replacing the heavy heater blower and related items with this light, fiberglass and metal assembly. The dash blank-out was to fin...
Here we have a 'must have' a rare desirable rebuilt Tachometer dash cluster for a 67Shelby GT350 or GT500, or an Eleanor or Bullitt clone. This set up includes a 140 mph speedometer (used in the 67/68Shelbys ) with the Trip Odometer feature, as well as an 8000 rpm tachometer. It has a nice reproductiondeluxe brushed aluminum dash bezel,new clear lenses and features a work with your harness 3 wi...
Here we have a 68 1/2 single long side C8OE 9430 B original Exhaust Manifold for a 428 Cobra Jet or Super Cobra Jet. This early edition 68 1/2 repaired unit has less webbing than the later models although it will work on the later models just fine. Complete with the factory passenger side spacer it was used on cars such as the 68 69 or 70 Shelby GT 500 and Mustang Mach 1. Ford and Mercury also ...
Here we have bunch of Smog setup pieces for a 428 CJ vehicle such as Shelby GT-500, Mustang Mach 1, Cougar Eliminator, Cyclone Spoiler, Torino CJ Talladega, and any other Ford product equipped with a 428 Cobra Jet engine. Often removed and discarded, this setup is still 'the law' in California, and is a must for those whose weekends involve a judge inspecting their car from top to bottom. This ...
Here we have a complete set of original Ford Deluxe Seat Backs for a 1967 Mustang or Shelby with the upgraded interior. These molded plastic seat trim pieces are bordered by a stainless steel molding. This redesign is referred to as the interior decor group option (luxury version interior). These molded panels were fastened to standard seats and require a bracket set to secure these in place fo...
Here we have an original Ford shifter assembly for a Borg Warner used on a 64 65 66 67 Shelby or Mustang with a T10 4 speed transmission. Ford offered two different suppliers on their 4 speed transmissions. The factory toploader and the optional Borg Warner side loader. Borg Warner, being an outsourced company, was replaced by the Ford factory unit, the toploader. Although there are not many T1...
Here we have an original set of Clutch and Brake pedals for a 69 Shelby, Mustang, Mach 1, or Cougar equipped with Manual Brakes. Reconditioned with new bushings, cleaned, detailed, and inspected, this set is ready to install to provide years of service in your classic Pony Car. A necessary item in a 4 speed changeover, these are complete with new pedal pads and are free from excessive play and ...
Here we have a NOS Ford right hand (passenger) side stamped steel lower door hinge for a 67 or 68 Mustang or Cougar with correct Ford part number C7ZZ-6522810-C. Mid year Ford engineers made a design upgrade replacing the heavier cast iron hinges with this the stamped steel from their parts suppliers. This lower hinge is correct for all of the 67-68 Shelby, Mustangs, Eleanors and it fits all 3 ...
Up for sale is a New Old Stock, or NOS, Driver Side Fender for an original Ford 1967 Mustang. This fender panel is in good condition and is ready to install. It comes with all mounting holes punched at the factory but does not come with pre-drilled holes for emblems or lettering. If you need help determining the proper placement of these we would be happy to help. Ford factory engineering assur...
Here we have a set of boot-well molding trim for a one year 67 Mustang or Shelby Convertible. These stainless steel trim pieces are often discarded or bent beyond repair during restoration and maintenance of these classic convertibles. Often seen with extra mounting holes, this set has NO added holes, and a complete set of support mounting clips and just add snaps (shown in photos).We have insp...
Here we have a 5 piece rear reveal molding trim set for a 65 66 Shelby Mustang GT Fastback. The Ford engineers divided the upper panels from the lower panels when manufacturing in the interior of the fastback. In order to join these pieces together they used 3/4 inch wide decor molding to the join panels at seam or joint location. Also available is the similar set up for a 67 or 68 fastback jus...
Here we have an original never run new F 78 14 Space Saver Spare tire that would have been used in a 69 or 70 Shelby Mustang Mach 1 Fastback equipped with the Fold Down rear seat, or cars such as the 428 Cobra Jet or the Boss 302, 351 and Boss 429 which was equipped with trunk mount batteries. In these cars, trunk space was at a premium, and so the collapsible Space Saver Spare, which inflates ...
Here we have a setup to add the part number correct factory alternator brackets to your Mustang or Shelby with a 428 Cobra Jet. The 428 Police Interceptor and some 390 GTs were also equipped with these brackets as well as the 428 CJ. These CJ motors were used in many other cars as well, such as Torinos, Cyclones, Cougars, Fairlanes, Falcons, and even Rancheros. As you can tell by the good used ...
Your Listing Here