More Filters
1965 66 67 68 Mustang Coupe & Fastback Door Sill Scuff Plate. Condition: Used-Good Shipping: Shipping Available Makes Ford Ford Models Mustang Year xx 64, 65, 66 Tag No. 0328 Hours: Normal Business Hours, Eastern Listing Type: Swap Market
Here we have an original NOS 9 Inch Brake Drum for a 67-68 Ford Mustang or Falcon with the correct part number C6DA-1125-A. This brake drum is correct for the front brakes for Coupe, Convertible, or Fastback and also the rear brakes on the Convertible. This never before installed, high quality genuine Ford part will outperform its reproduction counterparts, and also give you the satisfaction of...
67 68 Mustang Parts Orginal Trunk Lid Used no dents or rust inside has dark green color outside has primer Asking 150 Paypal Excepted
Mustang Weld-in Frame Rail Connectors 1965 - 1967 Mustang If you have ever wanted to take your Mustang to the next level of chassis updates, you know you need frame rail connectors. The US Car Tool frame rail connectors are custom CNC cut to be a precision fit to the floorpan of your Mustang. These frame rail connectors are precision CNC cut and CNC bent to form a unique frame member that follo...
Here we have an original never run new F 78 14 Space Saver Spare tire that would have been used in a 69 or 70 Shelby Mustang Mach 1 Fastback equipped with the Fold Down rear seat, or cars such as the 428 Cobra Jet or the Boss 302, 351 and Boss 429 which was equipped with trunk mount batteries. In these cars, trunk space was at a premium, and so the collapsible Space Saver Spare, which inflates ...
Here we have a NOS Ford right hand (passenger) side stamped steel lower door hinge for a 67 or 68 Mustang or Cougar with correct Ford part number C7ZZ-6522810-C. Mid year Ford engineers made a design upgrade replacing the heavier cast iron hinges with this the stamped steel from their parts suppliers. This lower hinge is correct for all of the 67-68 Shelby, Mustangs, Eleanors and it fits all 3 ...
Here we have an all original 1967 (only) Shelby, Mustang or Cougar Clutch and Power Disc Pedal Set. The Power brake option was needed for many of the big Block cars to stop and standard on all Shelby's. The boosters both Midland and Bendex demanded a different fulcrum or pivot point at the top than the common middle manual brake pedal point. Even the clutch and brake pedal support was different...
Here we have an early 427 Dual Point distributor for Big Block (FE) Ford engines that was used in motors such as the 390, 406, and 428. This rare distributor, marked C5AF-12127-E, dated 5H6 (August 6, 1965), was used in cars such as Thunderbolt Fairlane, Galaxie, and other mid to full size Ford and Mercury products,and could be used in abig blockShelby Mustang, Cougar, or Cobra.This is a good c...
Here we have an original NOS Ford Exhaust Manifold for a 170 or 200 six cylinder engine. This manifold was used in many Ford vehicles such as Mustang, Fairlane, Falcon, Ranchero, Comet from 62-67 and has the correct factory part number of C3DA-8480-A with a date code of 1H30. This never installed part is in excellent NOS condition with no noticible shelf wear and clean rust-free ports. These ea...
Here we have a NOS Ford right hand (passenger) side stamped steel upper door hinge for a 67 or 68 Mustang or Cougar with correct Ford part number C7ZZ-6522800-C. Mid year Ford engineers made a design upgrade replacing the heavier cast iron hinges with this the stamped steel from their parts suppliers. This top hinge is correct for all of the 67-68 Shelby, Mustangs, Eleanors and it fits all 3 bo...
Here we have an NOS exhaust manifold heat riser for 65-67 Mustang with the correct part number C5ZZ-9A603-B. As a part of the pre-heat system for the carburetor it was mounted to the exhaust manifold and attached to the air cleaner. The Ford designers attached a snorkel to breathers and a heat shield to the exhaust manifold, leaving the adjoining piece an 'S' tube to transfer the heat which was...
Here we have a back seat set (top and bottom) for a 1965-68 Mustang or Shelby Convertible. Keep in mind that the convertible bodies were designed differently than the coupe versions. There was a need for extra space on the sides so the top frame pistons could retract behind the convertible side panels. With northern cars floor rot as well as tops that went bad destroying these seats and so few ...
Here we have an original NOS "star" center cap for a 1967 Mustang with the blue Mustang insert and measure 3 1/4" in diameter. These were used on the popular styled steel wheels and have the correct Ford part number of C7ZZ-1130-A. This auction is for one center cap, although we have four available. If you need a full set just let us know and we will put up an auction just for you.These never i...
Here we have a 1967 / 1968 NOS Ford Mustang headlight extension assembly for the left hand driver s side Ford part number C7ZZ-13008-D. As seen in the pictures you will find this assembly is complete the headlight bucket with trim and all the mounting hardware. As is expected nothing fits quite like the original pieces. Keep in mind the fender lines begin at the extension and of course the desi...
Here we have an original complete 6 piece set of factorycFord Motor Mount set up for a 67 to 70 390, 427, or 428 Cobra Jet. Designed for the 67 Big Block Mustangs and Cougars it was also used in the 67 Shelby GT 500. In additionit is also correct for any 1967 68 69 70 GT Mustang Mach 1 or Cougar XR7 with the awesome FE engine power plantTo install these big block motors Ford had to redesign the...
Ford Mustang 351C '67-70 Doug's 1 3/4" Longtubes D670A2-R. Raw steel, some scratches from shipping, otherwise like new. Includes hardware and gaskets pictured. SOLD. Cashiers check or money order.
Used 1965 1966 967 1968 Mustang,Fairlane,Comet,4 BBLCarb Spacer Plate SBF 65 66 67 68. I gave her a bath in kerosene but you might want to clean her a little more. Shippin in lower 48 6.95
67-70 MUSTANG CLUTCH RELEASE LEVER DUST BOOT, NEW New reproduction clutch release lever dust boot. Fits 390, 427 and 428 engines. Applications include 1967, 1968, 1969, 1970, 67, 68, 69, 70, Ford, Mustang, Fastback, Convertible. Please email OhioMustang or call us at 440-949-2556 or our Toll Free Order Line 888-685-9680 if you have any questions. Shipping amount stated is for the lower 48 conti...
Need a Correct fitting Power Steering hose for your 67-70 390, 428 Mustang, and all 69-70 Mustangs?? This is a excellent reproduction of the Control Valve end Pressure hose . Important, because it has the correct bends to fit the control valve. It will secure correctly with the clamp to eliminate metal stress. Super nice original color, Super nice crimping, banding, fittings. SHOW QUALITY. See ...
Visit My eBay Store: Old Air Products Underhood A/C Performance Kit, w/ 6 C 67 Mustang, [50-0017C] Combine Our Popular Compressor Conversion Kit And Super-Kool Condenser Kit to Improve Performance Of Your Factory AC System. Also Includes: New Liquid Line And Compressor Safety Switch w/ Harness Old Air Products has been in business since 1989. We strive to provide quality parts and unsurpassed c...
Your Listing Here