Buy and Sell Classified Ads in Frisco, TX 12,953 items
A pair of beige, pleated curtains approximately 36 inches long by 8 feet wide, each. Took them out of a motorhome. Would be great for a table skirt or a puppet theater, etc. Need a good cleaning.
I need of a washer and dryer can pick up anytime thank you in advance
Son is in need of a washer and dryer can pick up anytime
7.5 Christmas Tree (prelit lights no longer work...but still a great tree) & wreath
Item posted in the 7-7.5 category
Mission style armoire, can be used as a media cabinet. Three drawers. One adjustable shelf
Perfect condition! Would be cute with a denim jacket for this time of year
Studs for Cylinder Heads. Please state length. These are used studs that have been cleaned for reuse. I de-grease each Stud and run a die over the threads to assure proper torqueing ability. I also clean the un-threaded portion on the wire wheel. Most Studs are $1 each.
Oil Drain Plate with no plug hole in the center. These plates were factory issue on late model Bugs/Ghias and perhaps other models. The entire plate must be removed in order to drain the oil. If you want your engine to have a more factory appearance, this plate is for you. Nice and clean, not rusted and not damaged.
I have a Scarce 113-905-205B VW Distributor. This is not a Bosch Distributor. It bears the VW paper label with the VW Logo on it. It is by Garbe-Lehmeyer. For Model Year 1966, for some reason, Bosch was unable to deliver distributors to the VW Factory. VW procured and assigned this Cast Iron Bodied Distributor to 1966 Models. It sometimes has been called a "Service Replacement" Distributor. The...
I have several sizes of Cylinder Head Valves--some New and some Used but good. Read the descriptions below, please. Shipping is extra. 1. Stainless Intake Valves 35.5mm--New, I have 4 @ $10 each and Used, I have 4 @ $5 each. 2. Stainless Intake Valves 40mm--New, I have 5 @ $10 each and Used, I have 6 @ $5 each. 3. Stainless Exhaust Valves 30mm (1500-1600cc Cylinder Heads)--I have 4 @ $10 each 4...
I have a Good Crankshaft Core--Steel (not cast!) $40.00. This Crankshaft will fit Beetles, Buses, Karmann Ghias and Things 1500 through 1600 and larger. Call Jay for details. Crankshaft is located in Garland, TX 75042 near Forest Lane and Shiloh Road. No Shipping, Please.
Studs--I have a quantity of Brand New 10mm X 7-3/8ths inches long Cylinder Head Studs. If you are converting to a Dual-port engine, you will need 2 of these "shortie" Studs in the middle on each side in the top row--for a total of 4 Studs. These are good quality Studs. I just obtained these--limited quantity--buy now!
I have 10mm X approx. 82mm (3-1/4th inch) Length Studs for the Bottom Engine Mounting Studs. These are genuine German original Studs. I have 3 remaining. If yours are missing or the threads have become worn, replace them at a reasonable cost. $10.00 each shipped in the USA.
New Arrival! 7-3/8ths inch X 10mm Studs are sold as a set of 4. Set of 4 Studs shipped USA for $20.00. If you are building a dual-port engine from a single-port case (from what formerly was a single-port engine) you will need 4 of the 7-3/8ths inch Studs for the upper row (middle two on each side). These are Genuine Original German Studs. Each Stud has been degreased and carefully cleaned. Then...
I have put together 5 Sets of Oil Drain Plate Studs. I have cleaned these good, used Sets. Each Set includes 5 Short Studs and 1 Long Stud with its washer and nut for the Oil Pick-up Tube Flange.
NOTE: Not for 40 Hp Cases! These fit 1300 and later engine cases. I have one (1) Set of Case Half Studs with their Nuts and Washers. The Set has three (3) Long Studs and three (3) Short Studs--each with a Washer and a Nut. Each Stud has been thoroughly cleaned and the Threads chased. Each Nut has been thoroughly cleaned and the Threads chased. 12mm X 1.50 Thread Pitch with 17mm Nuts. I also can...
1. SOLD 2. Metal Leve Standard Main Bearing Set--111-198-467 Std-Std with 30 Crank. (note Box#2) $30.00 Shipped USA 3. SOLD 4. SOLD 5. SOLD 6. SOLD 7. Rod Bearings for the following: 068-198-501BR 1980-1991 Turbo Diesel Transporter; Dasher-'78-'81;Golf '85-'87; Jetta-'80-'92; Quantum '82-'85; Rabbit '80-'84--$12 shipped USA. Box#7 #8. Rod Bearings -20 VW Part# 113-105-719BR by Mahle. New in the...
I have 2 Bosch Distributor Dust Covers--nice used condition. Part# 1-230-500-096. All have the Bosch Logo