ATR Tile Leveling Alignment System Start-up Kit

$49(Beverly Hills, CA)
Times Viewed: 8,080since 10-Nov-2013 0in the past 60 minutes
Reply to this Ad Flag
ATR Tile Leveling Alignment System Start-up Kit DIY Start-up Kit $49.99 Also available individual 2mm or 3mm Cross Spacers - $49.99 Edge Spacers - $26.99 T Shape Spacers - $34.99 Pro Spindles Pre-Assambele (reusable) - $58.95 The Choice of Professional In Stock Ship Same Day 2 Part System with (Re-Usable) Spindle and Spacer that eliminate lippage in tile installation (NO TOOLS Needed) Level Everything in its Path Buy Now at www.FlooringSupplyShop.com Very easy to learn and use at any skill level Grout spacer 5/64" (2mm) - Tile thickness 15/64 - 51/64 (1/4 - 3/4) (6mm-20mm) You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System While every other system require 360 units for 100 pieces of tile ATR require only 117 Very easy to learn and use at any skill level Advantages of the ATR Tile Levelers No Tools (GUN) needed! No expensive hand tools required. Simple and quick to lay with only 2 elements: Spacer & Pre-Assemble Spindle. The only system removed without the use of force. Only System that leave clean grout line (no risk of spacers not breaking all the way) (+) Cross shaped Spacers allows for 2/3 of savings. Creates a lippage free surface. Keeps tiles in place while drying. Assists in aligning tiles. Stress free installation. Professional finishes every time. Very simple and easy to use. Saves time. Suitable for both floors and walls. Suitable for indoor and outdoor uses. Reusable spindle, save money on you next project. Designed and made in Australia. Example of the different between ATR to other leveling system 100 pieces of tile project ATR use total of 117 spacers with approximately cost of $29.99 compare to any other leveling system 360 spacers with cost of $44.00 About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 243 pieces How to use 3 Easy steps 1. Spread thinset install tile 2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles. 3. Tighten spindle clock wise firmly until all four corners are aligned flush. * Remove Re-usable spindle once tile adhesive is dry. In Stock Ship Same Day Worldwide our store open to the public 5047 W Jefferson Blvd Los Angeles CA 90016 Mon - Fri 7:00 am - 5:00pm Sunday 12 noon - 4:00pm For more products visit our web site http://www.flooringsupplyshop.com Or call us at 323-731-8453
Price:
$49
Phone:
323-731-8453
Email:
Location:
34.072628; -118.398506 34.072628 -118.398506
Category:
Posted:
2014-10-28T18:15Z
Expires:
2015-01-28T18:15Z